Pace vs speed: what is the difference for runners?
Pace and speed are two ways of expressing the same thing, how fast you run, but they read differently and serve in different situations. Your GPS watch speaks pace, the treadmill and vVO2max speak speed. Moving from one to the other without hesitation avoids setting mistakes in training and strategy mistakes in races.
Pace = time per mile
Pace is written in minutes and seconds per mile (min/mi), or per kilometer in most of the world. It is the standard in road running: your watch shows pace, training plans prescribe paces, and race pacers carry a sign with a finish time that matches a fixed pace.
Its logic is the reverse of speed: the smaller the number, the faster you go. Going from 10:00 to 9:00 per mile is speeding up. This inversion confuses beginners, but it has a decisive advantage: splits are worked out in your head. At 9:00 per mile, you pass mile 7 at 63:00, with no division.
The guide running pace explained details how to calculate and use it in a race.
Speed = miles per hour
Speed is written in mph (or km/h) and follows the intuitive logic: the bigger the number, the faster you go. It is used:
- on the treadmill, whose console is set in mph or km/h;
- to express vVO2max (maximal aerobic speed), for example "vVO2max of 9.3 mph";
- on the track, where field tests (half Cooper, VAMEVAL) give a result in km/h;
- in cycling, cross-country skiing and scientific studies, which reason in m/s or km/h.
Physiologists prefer speed because it is proportional to oxygen uptake: running at 8 mph takes roughly twice as much energy per minute as running at 4 mph. Pace is not linear: the effort gap between 7:00 and 6:30 per mile is much bigger than between 11:00 and 10:30 per mile, even though the displayed difference is the same (30 seconds).
Conversion formulas
The two are linked by a simple relation, since an hour has 60 minutes:
Speed (mph) = 60 ÷ pace (in decimal minutes per mile)
Pace (min/mi) = 60 ÷ speed (mph)
The only tricky part is the seconds, which must be turned into a fraction of a minute:
- 8:00 per mile = 60 ÷ 8 = 7.5 mph
- 9:30 per mile = 9.5 minutes = 60 ÷ 9.5 = 6.3 mph
- 7:45 per mile = 7.75 minutes = 60 ÷ 7.75 = 7.7 mph
- 7 mph = 60 ÷ 7 = 8.571 minutes = 8 min + 0.571 × 60 s = 8:34 per mile
Two anchors to remember: 6 mph = 10:00 per mile and 7.5 mph = 8:00 per mile. For everything else, the custom distance pace calculator shows both units instantly, in miles and kilometers.
Full conversion table
The profiles are rough guides for a 10K race pace, not for an easy run.
| Pace per mile | Pace per km | Speed | 10K time | Typical profile (10K pace) |
|---|---|---|---|---|
| 4:50 | 3:00 | 12.4 mph | 30:00 | World-class elite |
| 5:38 | 3:30 | 10.7 mph | 35:00 | Seasoned athlete |
| 6:26 | 4:00 | 9.3 mph | 40:00 | Advanced runner |
| 7:15 | 4:30 | 8.3 mph | 45:00 | Good runner |
| 8:03 | 5:00 | 7.5 mph | 50:00 | Regular runner |
| 8:51 | 5:30 | 6.8 mph | 55:00 | Intermediate runner |
| 9:39 | 6:00 | 6.2 mph | 1:00:00 | Recreational runner |
| 10:28 | 6:30 | 5.7 mph | 1:05:00 | Advanced beginner |
| 11:16 | 7:00 | 5.3 mph | 1:10:00 | Beginner |
| 12:52 | 8:00 | 4.7 mph | 1:20:00 | Brisk walk / jog |
Treadmill: from displayed speed to pace
This is where conversion helps most. You want to reproduce your easy or interval pace on a treadmill, but the console only offers mph. Here are the equivalents for common settings:
| Treadmill speed | Pace per mile | Pace per km | Typical session |
|---|---|---|---|
| 5.0 mph | 12:00 | 7:27 | Beginner easy run, recovery |
| 5.5 mph | 10:55 | 6:47 | Easy running |
| 6.0 mph | 10:00 | 6:13 | Easy running |
| 6.5 mph | 9:14 | 5:44 | Steady running, 4:02 marathon pace |
| 7.0 mph | 8:34 | 5:20 | 3:45 marathon pace |
| 7.5 mph | 8:00 | 4:58 | 50-minute 10K pace, 1:45 half marathon pace |
| 8.0 mph | 7:30 | 4:40 | Tempo, 1:38 half marathon pace |
| 8.5 mph | 7:04 | 4:23 | 44-minute 10K pace |
| 9.0 mph | 6:40 | 4:09 | 41-minute 10K pace |
| 10.0 mph | 6:00 | 3:44 | vVO2max intervals (experienced runner) |
On a treadmill, set a 1% incline: it makes up for the lack of air resistance and brings the energy cost close to running outdoors at the same speed, as measured by Jones and Doust (Journal of Sports Sciences, 1996). Without it, a session at 7.5 mph on the treadmill stays slightly easier than 8:00 per mile on the road.
When to use pace, when to use speed?
| Situation | Preferred unit | Why |
|---|---|---|
| Road race, splits | Pace | Instant mental math for splits |
| Training plan, GPS watch | Pace | Standard of plans and watches |
| Treadmill | Speed | Console setting |
| vVO2max test, zones in % of vVO2max | Speed | vVO2max is defined as a speed |
| Track intervals | Time per rep | For example 400 m in 1:36 rather than 6:26 per mile |
| Comparing two efforts of different intensity | Speed | Linear link with effort |
On the track, runners usually think in time per lap or per rep. A 400 m in 1:36 matches 6:26 per mile; a 1000 m in 4:30 matches 7:15 per mile. The 5000 m and 10,000 m track calculators show lap times directly.
vVO2max: one speed that drives all your paces
vVO2max is the speed at which oxygen uptake reaches its maximum; it is measured in the field by a progressive test such as the one described by Léger and Boucher in 1980 (Université de Montréal track test, Canadian Journal of Applied Sport Sciences). All your training paces derive from it: easy running at 65-75% of vVO2max, 10K pace around 85-90%, short intervals at 95-105%.
For a vVO2max of 9.3 mph (15 km/h), 70% gives 6.5 mph, so 60 ÷ 6.5 = 9:12 per mile. This back and forth between speed (for the percentage) and pace (for the watch) is what runners do all the time. The tests to measure your vVO2max are in the article on vVO2max field tests and the full correspondences in the guide to training zones.
FAQ
How do I convert mph to pace per mile?
Divide 60 by the speed. For 6.5 mph, 60 ÷ 6.5 = 9.2308 minutes. The whole part gives the minutes (9) and the decimal part times 60 gives the seconds (0.2308 × 60 = 14). Result: 9:14 per mile. The custom distance pace calculator on this site converts both ways, with the matching splits.
Why do GPS watches show pace rather than speed?
Because pace is the natural unit of road runners: it lets you predict a finish time and check splits without math. Most watches still let you switch to mph in the run profile settings, which is handy on the track or for sessions set as a percentage of vVO2max.
What pace is 7.5 mph?
7.5 mph is exactly 8:00 per mile (60 ÷ 7.5 = 8), or 4:58 per kilometer. It is the pace of a 24:51 5K, a 49:43 10K or a 1:44:53 half marathon. Together with 6 mph = 10:00 per mile, it is one of the two easiest anchors to remember.
Is treadmill speed the same as outdoors?
At the same displayed speed, the effort on a treadmill is slightly lower, since there is no air resistance and the belt carries your foot. A 1% incline makes up for this gap at easy and training paces. Watch the calibration too: many treadmills display a speed that is off by a few tenths of a mph.


