Home› Blog› Training zones and vVO2max: the runner's guide

Training zones and vVO2max: the runner's guide

Training zones and vVO2max: the runner's guide

vVO2max, or maximal aerobic speed, is the running speed at which your oxygen uptake reaches its maximum, your VO2max. It is measured in mph or km/h and can be held for about 4 to 8 minutes. It is the most practical reference to set your training zones: each type of session matches a percentage of vVO2max, so a precise pace, without needing a heart rate monitor.

Why train by zones?

Always running at the same intensity leads to a plateau. Each zone has its own effect: easy running builds the aerobic base, threshold work pushes back lactate buildup, vVO2max work raises the ceiling. Elite endurance athletes follow a polarized split: about 80% of the volume at low intensity, 20% at high intensity (Seiler, 2010).

The 5 training zones

Five zones is the most common split in running. The % of max HR are indicative: heat, fatigue and fitness shift them.

Zone% vVO2max% max HRFeelingHow longUse
Zone 1: recovery55 to 65%60 to 70%Very easy, easy conversationOver 2 hActive recovery, day after a race
Zone 2: easy65 to 75%70 to 80%Comfortable, full sentences1 to 3 hEasy runs, long runs, 70 to 80% of volume
Zone 3: tempo / marathon pace75 to 85%80 to 88%Steady, short sentences30 min to 1:30Marathon and half marathon pace, tempo
Zone 4: threshold / 10K pace85 to 95%88 to 95%Hard, a few words10 to 40 minLong intervals, 10K and 5K pace
Zone 5: vVO2max95 to 105%95 to 100%Maximal, cannot talk2 to 8 min per repShort intervals (30/30, 200 to 400 m)

The aerobic threshold roughly separates zones 2 and 3; the anaerobic threshold (or lactate threshold) sits in zone 4, between 85 and 90% of vVO2max in a trained runner. It is the intensity you can hold for about an hour, close to half marathon pace for good runners and to 10K pace for recreational runners.

Worked example: vVO2max of 9.3 mph (15 km/h)

A vVO2max of 9.3 mph matches a runner who can run a 10K in about 45 minutes. Here are the zones in speed and in pace (pace = 60 ÷ speed).

ZoneSpeedPace per mileType of session
Zone 15.1 to 6.1 mph11:42 to 9:5430 to 40-minute recovery run
Zone 26.1 to 7.0 mph9:54 to 8:3590-minute long run
Zone 37.0 to 7.9 mph8:35 to 7:343 × 10 min at marathon pace, 2 min recovery
Zone 47.9 to 8.9 mph7:34 to 6:475 × 1000 m at 10K pace, 1:30 recovery
Zone 58.9 to 9.8 mph6:47 to 6:082 × 8 × 30 s / 30 s, or 10 × 300 m

Worked example: vVO2max of 7.5 mph (12 km/h)

A vVO2max of 7.5 mph is typical of a runner starting to race who runs a 10K in 55 to 58 minutes. The zones shift accordingly: zone 2 is run between 12:23 and 10:44 per mile, which many beginners find "too slow" even though it is exactly the right intensity.

ZoneSpeedPace per mile
Zone 14.1 to 4.8 mph14:38 to 12:23
Zone 24.8 to 5.6 mph12:23 to 10:44
Zone 35.6 to 6.3 mph10:44 to 9:28
Zone 46.3 to 7.1 mph9:28 to 8:28
Zone 57.1 to 7.8 mph8:28 to 7:40

To turn your own percentages into paces, multiply your vVO2max by the percentage, then divide 60 by the result. Example: 70% of 8.4 mph (13.5 km/h) = 5.87 mph, so 60 ÷ 5.87 = 10:13 per mile. The running pace guide walks through the method.

From zones to race paces

Zones also help estimate a realistic race pace for each distance. The longer the race, the lower the share of vVO2max you can hold:

Distance% vVO2max held (trained runner)Example, vVO2max 9.3 mphFinish time
5K90 to 95%7:00/mi (92%)21:44
10K85 to 90%7:19/mi (88%)45:27
Half marathon80 to 85%7:51/mi (82%)1:42:55
Marathon75 to 80%8:22/mi (77%)3:39:12

These percentages assume training suited to the distance. A runner who never does long runs will rather hold 70 to 72% of vVO2max over a marathon. To turn a goal time into a pace and splits, use the 10K pace calculator or the goal pages, for example the 45-minute 10K.

What about heart rate?

  • Max HR: prefer the Tanaka equation (208 - 0.7 × age) to "220 minus age", with a margin of about 10 bpm either way.
  • Lag: heart rate takes 1 to 2 minutes to settle and drifts with heat, so it is unreliable for short reps.

In practice: zones 1 to 3 by heart rate or by the talk test, zones 4 and 5 by pace. Your zones in bpm for your age: max heart rate and zones calculator.

How do you find your vVO2max?

  • Field test: half Cooper (maximum distance in 6 minutes, vVO2max in km/h = distance in meters ÷ 100), VAMEVAL or the Léger-Boucher track test. The protocols are in the article on the best vVO2max field tests.
  • From a race: your average speed over an all-out 5K is about 90 to 92% of your vVO2max. A 25:00 5K (7.5 mph) suggests a vVO2max close to 8.1 mph (13 km/h).
  • Benchmark session: 6 × 1000 m with 1:30 recovery; the average speed held over the reps is roughly 95% of vVO2max.

The vVO2max calculator turns a test result or a race time into vVO2max, then into paces for each zone.

Retest every 8 to 12 weeks: an improving vVO2max shifts all your zones, and training paces that became too easy no longer make you progress.

Spreading your sessions over a week

For three runs a week, an effective split is one easy run in zone 2, one quality session in zone 4 or 5 (alternating from week to week) and a long run in zone 2, possibly finishing with 10 minutes in zone 3. With four runs, add a second easy run. The interval sessions matching zones 4 and 5 are described in the article on types of interval sessions, and the training plan generator builds a full program from your vVO2max.

FAQ

What percentage of vVO2max for easy running?

Between 65 and 75% of vVO2max, which is zone 2. For a vVO2max of 8.7 mph (14 km/h), that gives 5.7 to 6.5 mph, or 10:37 to 9:12 per mile. At this intensity you should be able to speak in full sentences. If you cannot, slow down: easy runs run too fast are the most common mistake.

How long can you run at 100% of vVO2max?

Between 4 and 8 minutes depending on the runner, with an average around 6 minutes. That is why the half Cooper test lasts 6 minutes and why vVO2max reps stay short (30 seconds to 3 minutes), with recoveries that let you accumulate 10 to 20 minutes at this intensity in one session.

Should I train by vVO2max or by heart rate?

Both complement each other. Pace from vVO2max is precise and immediate, ideal for intervals and race paces. Heart rate reflects fatigue and the day's conditions, useful for easy runs and long runs. A watch showing both lets you check that zone 2 pace still goes with a low heart rate.

My vVO2max is 9.9 mph (16 km/h): what is my threshold pace?

The anaerobic threshold sits around 85 to 90% of vVO2max, so 8.5 to 8.9 mph for a vVO2max of 9.9 mph, which means paces of 7:06 to 6:42 per mile. A typical session is 3 × 10 minutes at 6:58 per mile with 2 minutes of jogging recovery. It is also roughly your 10K race pace.

Related tools

Sources

  1. Seiler S (2010). What is best practice for training intensity and duration distribution in endurance athletes? Int J Sports Physiol Perform. 2010;5(3):276-291. Link
  2. Tanaka H, Monahan KD, Seals DR (2001). Age-predicted maximal heart rate revisited. J Am Coll Cardiol. 2001;37(1):153-156. Link
  3. Foster C, et al. (2008). The talk test as a marker of exercise training intensity. J Cardiopulm Rehabil Prev. 2008;28(1):24-30. Link