Running pace explained: the complete guide
Running pace is the time it takes you to cover one mile, or one kilometer, written in minutes and seconds (min/mi or min/km). It is the number every runner lives by: your GPS watch shows it, training plans prescribe it, and on race day it is what you have to hold to reach your goal. This guide explains how to read it, calculate it, convert it to speed and, above all, use it to improve.
What is running pace?
Speed (mph or km/h) tells you a distance per hour. Pace tells you a time per unit of distance. A pace of 8:00 per mile means it takes you exactly 8 minutes to run one mile. The smaller the number, the faster you go: 7:30/mi is quicker than 8:30/mi.
Most American runners think in minutes per mile, most of the rest of the world in minutes per kilometer. The two are easy to mix up: 8:00/mi is about 4:58/km, and 5:00/km is about 8:03/mi. Every calculator on this site shows both.
Why time per distance rather than speed? Because in a race, what matters is the clock at each mile marker. Seeing 8:00 at mile 1 and knowing you must pass mile 3 in 24:00 is instant arithmetic. In mph you would have to divide every time.
How to calculate your pace
The formula is simple:
Pace (min/mi) = total time (in minutes) ÷ distance (in miles)
Three worked examples:
- A 10K (6.21 mi) in 50 minutes: 50 ÷ 6.214 = 8.05, so 8:03 per mile (5:00/km).
- A 5K (3.11 mi) in 27:30: 27.5 ÷ 3.107 = 8.85, so 8:51 per mile (5:30/km).
- A half marathon (13.1 mi) in 1:45: 105 ÷ 13.109 = 8.01, so 8:01 per mile (4:59/km).
The classic trap is the decimals: 8.85 minutes is not 8 minutes 85 seconds but 8 minutes and 0.85 × 60 = 51 seconds. To skip the arithmetic, use the pace calculator, or the half marathon pace calculator and the 10K pace calculator: enter a goal time and get the pace and every split.
The other way round, to predict a finish time: Time = pace × distance. At 10:00 per mile, a marathon takes 10 × 26.219 = 262 minutes, or 4:22.
Pace, speed and finish time by distance
For the most common paces, the table gives the equivalent per kilometer, the speed and the finish time over the four classic road distances (half marathon = 13.1 mi, marathon = 26.2 mi).
| Pace per mile | Pace per km | Speed | 5K | 10K | Half | Marathon |
|---|---|---|---|---|---|---|
| 6:00 | 3:44 | 10.0 mph | 18:38 | 37:17 | 1:18:39 | 2:37:19 |
| 7:00 | 4:21 | 8.6 mph | 21:45 | 43:30 | 1:31:46 | 3:03:32 |
| 8:00 | 4:58 | 7.5 mph | 24:51 | 49:43 | 1:44:53 | 3:29:45 |
| 9:00 | 5:36 | 6.7 mph | 27:58 | 55:55 | 1:57:59 | 3:55:58 |
| 10:00 | 6:13 | 6.0 mph | 31:04 | 1:02:08 | 2:11:06 | 4:22:11 |
| 11:00 | 6:50 | 5.5 mph | 34:11 | 1:08:21 | 2:24:12 | 4:48:24 |
| 12:00 | 7:27 | 5.0 mph | 37:17 | 1:14:34 | 2:37:19 | 5:14:38 |
One useful reading: holding the same pace in a marathon as in a half is not realistic for most runners. In practice, marathon pace is 25 to 40 seconds per mile slower than half marathon pace, which is itself 25 to 30 seconds per mile slower than 10K pace. This is the hierarchy of paces.
Pace and speed: one formula each way
Pace and speed describe the same thing from two angles. To go from one to the other:
- Speed (mph) = 60 ÷ pace (in decimal minutes per mile). Example: 8:00/mi = 60 ÷ 8 = 7.5 mph.
- Pace (min/mi) = 60 ÷ speed (mph). Example: 6 mph = 60 ÷ 6 = 10.00, so 10:00/mi.
Speed stays the reference on a treadmill and for maximal aerobic speed. The article pace vs speed explains when to use which.
A runner's different paces
A runner does not have one pace but a range of paces, each tied to a type of session. They are usually set as a percentage of vVO2max (maximal aerobic speed), the speed at which oxygen uptake reaches its maximum. Physiologists Véronique Billat and Jean-Pierre Koralsztein showed that this speed can only be held for about 4 to 8 minutes, which makes it a solid anchor for every other intensity (Billat and Koralsztein, Sports Medicine, 1996).
| Pace | % of vVO2max | Example for vVO2max 9.3 mph (15 km/h) | Use |
|---|---|---|---|
| Easy running | 65 to 75% | 9:54 to 8:35/mi | Easy runs, long runs, 70 to 80% of volume |
| Marathon pace | 75 to 80% | 8:35 to 8:03/mi | Long blocks at goal pace |
| Half marathon pace | 80 to 85% | 8:03 to 7:34/mi | Tempo, threshold |
| 10K pace | 85 to 90% | 7:34 to 7:09/mi | Long intervals (1000 m to 2000 m) |
| 5K pace | 90 to 95% | 7:09 to 6:47/mi | Medium intervals (600 m to 1000 m) |
| vVO2max | 95 to 105% | 6:47 to 6:08/mi | Short intervals (30/30, 200 m to 400 m) |
The key to improving: most of your miles are run slowly. Stephen Seiler's work on intensity distribution in endurance athletes shows that about 80% of the volume is done at low intensity and the rest at high intensity (Seiler, International Journal of Sports Physiology and Performance, 2010). Running every easy run at 10K pace is the most common mistake among runners who plateau. To find your own zones, read the guide to training zones based on vVO2max.
Using pace in a race: splits and even pacing
Knowing your goal pace lets you build a split table: at 8:03 per mile for a 50-minute 10K, you pass mile 3 in 24:09 and mile 5 in 40:15. If your watch shows 23:00 at mile 3, you are running about 20 seconds per mile too fast, and that debt is almost always paid back in the last third.
Nearly every road world record from the 5K to the marathon was set at an even pace or with a negative split (second half slightly faster than the first). Strategies and worked numbers are in the article on negative split, positive split and even pacing. Reference performances are listed by World Athletics.
A few practical rules:
- Set a pace alert on your watch (for example between 7:55 and 8:10 for an 8:03 goal).
- The first mile should be at most 5 to 10 seconds slower than goal pace, never faster.
- On a hilly course, think constant effort rather than constant pace: you lose time uphill and get it back downhill.
- GPS often overstates distance by 1 to 2% in cities: trust the official mile markers for your splits.
What pace should you aim for?
Each goal time matches one precise pace, and each pace a range of times over the other distances. The goal pages detail the splits and key sessions for each time, for example a 25-minute 5K (8:03/mi), a 50-minute 10K (8:03/mi) or a 4-hour marathon (9:09/mi). For a non-standard distance (a 7.5K, a 12K loop), the custom distance pace calculator does the math.
FAQ
What is a good running pace?
There is no absolute good pace: it depends on your level and on the session. For a regular recreational runner, easy pace often sits between 9:40 and 11:15 per mile and 10K race pace between 8:00 and 9:40 per mile. The best guide is the talk test: on an easy run, you should be able to hold a conversation.
How do I convert pace to mph?
Divide 60 by your pace in decimal minutes. For 8:30 per mile, first turn 30 seconds into 0.5 minute, then 60 ÷ 8.5 = 7.1 mph. The other way, 60 ÷ 6 mph = 10.0, so 10:00 per mile. The calculators on this site show both units at once to avoid rounding errors.
What pace do I need for a 1-hour 10K?
A 10K in 1:00:00 needs an average pace of 9:39 per mile (6:00/km), or 6.2 mph. You pass mile 3 in about 28:58. To keep a margin, aim for 9:35 for the first 5 miles and pick it up slightly over the last mile if you feel good.
Why does my GPS watch show a different pace from the official time?
GPS measures your actual path, which differs from the official line measured along the shortest route. In a race you almost always cover more than the nominal distance (100 to 300 meters in a marathon), so your watch shows a faster pace than your official result. Treat the official distance as the reference.
Should my pace be the same for a 5K and a marathon?
No. The longer the distance, the slower the pace you can hold, because the effort must stay below threshold to save glycogen. A runner who races a 5K at 7:15 per mile typically runs the 10K around 7:30, the half around 7:55 and the marathon between 8:20 and 8:35 per mile, depending on their endurance training.


