Home› Blog› Estimate your vVO2max from a race time (5K, 10K, half): method and tables

Estimate your vVO2max from a race time (5K, 10K, half): method and tables

No track nearby, no wish to suffer through a 6-minute all-out test, but you have a recent 5K, 10K or half marathon time? Good news: that time is enough to estimate your vVO2max accurately enough to set your training paces. This guide explains the method, gives three ready-to-use conversion tables and details the cases where the estimate goes wrong.

The principle: a sustainable percentage of vVO2max by duration

vVO2max (velocity at VO2max, also called maximal aerobic speed) is the speed at which you reach your VO2max. A trained runner can hold it for 4 to 8 minutes. Beyond that, the speed you can sustain drops predictably with the duration of the effort: the longer the race, the smaller the fraction of vVO2max you use.

This relationship between duration and fraction of vVO2max was modeled in the 1980s by physiologists in Quebec. The work of Léger and Mercier on the energy cost of running, then that of Péronnet and Thibault (1989) on the mathematical analysis of world records, showed that sustainable speed declines almost logarithmically with race time. These models were built on elite runners: they give a solid trend, but the exact percentages vary from one person to another. Treat them as a practical rule, not a law.

For a regularly trained recreational runner, the following orders of magnitude apply; they are the ones used by our goal time pages:

DistanceTypical durationSustainable % of vVO2max
3000 m10 to 15 min95 to 98%
5K17 to 35 minabout 94%
10K35 to 70 minabout 89%
Half marathon1:15 to 2:30about 84%
Marathon2:45 to 5:30about 78%

The formula is then straightforward: estimated vVO2max = average race speed ÷ sustainable percentage. A 50-minute 10K is an average of 7.5 mph (12 km/h); divided by 0.89, that gives a vVO2max of about 8.4 mph (13.5 km/h).

For a time not in the tables, the vVO2max calculator does the conversion, adjusting the percentage to the exact race duration, and gives your training paces.

Table 1: vVO2max estimated from a 5K time

The 5K is the distance closest to vVO2max, so it gives the most reliable estimate. Basis: 94% of vVO2max.

5K timePace per mile (per km)SpeedEstimated vVO2max
17 min5:28 (3:24)11.0 mph (17.6 km/h)11.7 mph (18.8 km/h)
18 min5:48 (3:36)10.4 mph (16.7 km/h)11.0 mph (17.7 km/h)
19 min6:07 (3:48)9.8 mph (15.8 km/h)10.4 mph (16.8 km/h)
20 min6:26 (4:00)9.3 mph (15.0 km/h)9.9 mph (16.0 km/h)
21 min6:46 (4:12)8.9 mph (14.3 km/h)9.4 mph (15.2 km/h)
22 min7:05 (4:24)8.5 mph (13.6 km/h)9.0 mph (14.5 km/h)
23 min7:24 (4:36)8.1 mph (13.0 km/h)8.6 mph (13.9 km/h)
24 min7:43 (4:48)7.8 mph (12.5 km/h)8.3 mph (13.3 km/h)
25 min8:03 (5:00)7.5 mph (12.0 km/h)7.9 mph (12.8 km/h)
27 min8:41 (5:24)6.9 mph (11.1 km/h)7.3 mph (11.8 km/h)
30 min9:39 (6:00)6.2 mph (10.0 km/h)6.6 mph (10.6 km/h)
32 min10:18 (6:24)5.8 mph (9.4 km/h)6.2 mph (10.0 km/h)
35 min11:16 (7:00)5.3 mph (8.6 km/h)5.7 mph (9.1 km/h)

Aiming for a specific time? The 20-minute 5K and 25-minute 5K pages detail the required vVO2max, session paces and the matching plan.

Table 2: vVO2max estimated from a 10K time

Basis: 89% of vVO2max. It is the distance most runners have raced recently, hence its practical value.

10K timePace per mile (per km)SpeedEstimated vVO2max
35 min5:38 (3:30)10.7 mph (17.1 km/h)12.0 mph (19.3 km/h)
37 min5:57 (3:42)10.1 mph (16.2 km/h)11.3 mph (18.2 km/h)
40 min6:26 (4:00)9.3 mph (15.0 km/h)10.5 mph (16.9 km/h)
42 min6:46 (4:12)8.9 mph (14.3 km/h)10.0 mph (16.1 km/h)
45 min7:15 (4:30)8.3 mph (13.3 km/h)9.3 mph (15.0 km/h)
48 min7:43 (4:48)7.8 mph (12.5 km/h)8.7 mph (14.0 km/h)
50 min8:03 (5:00)7.5 mph (12.0 km/h)8.4 mph (13.5 km/h)
55 min8:51 (5:30)6.8 mph (10.9 km/h)7.6 mph (12.3 km/h)
1:009:39 (6:00)6.2 mph (10.0 km/h)7.0 mph (11.2 km/h)
1:0510:28 (6:30)5.7 mph (9.2 km/h)6.4 mph (10.4 km/h)
1:1011:16 (7:00)5.3 mph (8.6 km/h)6.0 mph (9.6 km/h)

To go further on this distance, see our 40-minute 10K, 45-minute 10K, 50-minute 10K or 1-hour 10K goals.

Table 3: vVO2max estimated from a half marathon time

Basis: 84% of vVO2max. The longer the distance, the more race-specific endurance weighs on the result: the estimate stays useful, but its margin of error grows (see below).

Half marathon timePace per mile (per km)SpeedEstimated vVO2max
1:155:43 (3:33)10.5 mph (16.9 km/h)12.5 mph (20.1 km/h)
1:206:06 (3:48)9.8 mph (15.8 km/h)11.7 mph (18.8 km/h)
1:256:29 (4:02)9.3 mph (14.9 km/h)11.0 mph (17.7 km/h)
1:306:52 (4:16)8.7 mph (14.1 km/h)10.4 mph (16.7 km/h)
1:357:15 (4:30)8.3 mph (13.3 km/h)9.9 mph (15.9 km/h)
1:407:38 (4:44)7.9 mph (12.7 km/h)9.4 mph (15.1 km/h)
1:458:01 (4:59)7.5 mph (12.1 km/h)8.9 mph (14.4 km/h)
1:508:23 (5:13)7.2 mph (11.5 km/h)8.5 mph (13.7 km/h)
2:009:09 (5:41)6.6 mph (10.5 km/h)7.8 mph (12.6 km/h)
2:1510:18 (6:24)5.8 mph (9.4 km/h)6.9 mph (11.2 km/h)
2:3011:27 (7:07)5.2 mph (8.4 km/h)6.2 mph (10.0 km/h)

The 1:30 half, 1:45 half and 2-hour half pages use these values and turn them into sessions.

How accurate is this estimate?

When your race time underestimates your vVO2max

  • A poorly paced race: starting too fast, hitting the wall in the last miles. The time then reflects your strategy, not your engine.
  • Unfavorable conditions: heat, wind, a hilly course or an uphill final kilometer.
  • A "speed" profile: if you come from the 800 m or the 1500 m, you hold a lower than average percentage of vVO2max over long distances. An estimate from a half will be pessimistic.

When your race time overestimates your vVO2max

  • An "endurance" profile: a seasoned marathoner can hold 86 to 88% of vVO2max over a half. In that case, converting at 84% inflates their vVO2max by about 0.6 mph (1 km/h). It is the most common bias among runners who do a lot of volume and few intervals.
  • A short or downhill course: a GPS-measured 10K on a non-certified course can be 6.1 miles (9.8 km).

In practice, allow an uncertainty of plus or minus 0.3 mph (0.5 km/h) from a well-run 5K or 10K, and up to 0.6 mph (1 km/h) from a half. If two recent times give different vVO2max values, favor the shorter distance.

Race time or field test: which to choose?

A field vVO2max test (6-minute half Cooper, 5-minute test or Vameval) directly measures the speed held over the duration matching vVO2max. It is more accurate than a conversion, especially for atypical profiles, but it needs a track, a serious warm-up and, above all, the habit of going all out for 6 minutes, which takes practice.

CriterionEstimate from a race timeField test (6 min, Vameval)
Accuracy± 0.3 to 0.6 mph (0.5 to 1 km/h)± 0.2 mph (0.3 km/h) if well executed
EquipmentNone (a recent race time)Track or measured course, GPS or cones
FatigueNone (the race is already done)Hard session, 48 h of recovery
Atypical profilesSpeed/endurance biasDirect measurement, no bias
FrequencyAfter every raceEvery 8 to 12 weeks

The ideal combination: a field test at the start of a training cycle to set the reference, then race times to check that the estimated vVO2max moves in the same direction.

Using your vVO2max to set your training paces

Once you know your vVO2max, all your paces follow from it. The article on training zones as a percentage of vVO2max details each zone; here is the essentials for a vVO2max of 9.3 mph (15 km/h), estimated for example from a 45-minute 10K:

Session% vVO2maxSpeedPace per mile (per km)
Easy run65 to 75%6.1 to 7.0 mph (9.8 to 11.3 km/h)9:51 to 8:33 (6:09 to 5:20)
Marathon pace78%7.3 mph (11.7 km/h)8:15 (5:08)
Half pace / threshold84 to 88%7.8 to 8.2 mph (12.6 to 13.2 km/h)7:40 to 7:19 (4:46 to 4:33)
10K pace89%8.3 mph (13.3 km/h)7:15 (4:30)
Short intervals (200 to 400 m)100 to 105%9.3 to 9.8 mph (15.0 to 15.8 km/h)6:26 to 6:07 (4:00 to 3:49)

To convert any speed into a pace or get your splits, use our 5K, 10K and half marathon calculators.

FAQ: estimating vVO2max from a race time

What is the formula to estimate vVO2max from a 10K?

Divide the distance by your time in hours to get your average speed, then divide that speed by 0.89. Example: 10K in 50 minutes = 7.5 mph (12 km/h); 7.5 ÷ 0.89 = 8.4 mph (13.5 km/h) estimated vVO2max. For a 5K, divide by 0.94; for a half, by 0.84.

Can you estimate vVO2max from a marathon?

It is possible (average speed divided by 0.78) but unreliable: over 26.2 miles, the result depends as much on glycogen management, heat and experience as on vVO2max. The error can exceed 0.9 mph (1.5 km/h). Prefer a 5K or 10K time.

My race time is from last year, is it still valid?

No. vVO2max changes with training, within a few weeks in either direction. Use a time less than two months old, run in normal conditions, or do a new field test.

My 5K and half marathon give different vVO2max values: which one should I use?

Favor the value from the 5K, physiologically closest to vVO2max. The gap between the two is information in itself: if the half gives a higher vVO2max, you have an endurance profile; if it gives a lower one, your race-specific endurance needs work.

Why does my GPS watch give a different number?

Watches and apps often estimate VO2max from heart rate, then convert it into a speed. Gaps of 0.6 to 1.2 mph (1 to 2 km/h) with a race-time estimate are common. The value from a real race is generally closer to what you will hold in training.

Related tools

Sources

  1. Péronnet F, Thibault G (1989). Mathematical analysis of running performance and world running records. J Appl Physiol. 1989;67(1):453-465. Link
  2. Léger L, Mercier D (1984). Gross energy cost of horizontal treadmill and track running. Sports Med. 1984;1(4):270-277. Link